What Size are the Bolts Used to Install Curt Trailer Hitch on a 2002 Subaru Forester
Question:
I recently purchased a trailer hitch from etrailer. It seems like the bolts from the vehicle are not quit long enough to attach the trailer hitch. If I were willing to purchase replacement bolts, what size and length would I want? Also, do that have to be pinch bolts I have never heard of pinch bolts?
asked by: Bud H
Helpful Expert Reply:
The bolts used on your 2002 Subaru Forester to install Curt trailer hitch # C12038 are 12mm bolts. They are likely coarse threaded. You will need to use grade 5 bolts or better. They should be available at a local hardware store.
Pinch bolts are usually used to hold two round things together with some sort of clamp bracket. A good example of this is a bike handlebars where you would loosen it to make vertical and alignment adjustments.
I am not sure why the bolts are not long enough. The hitch material should only be a 1/4 inch thick at most. If they seem like the bolts are just spinning and not catching anything that could mean that the weldnuts inside the frame have broken. I would have a mechanic take a look or use a flashlight and feel around in the bolt hole to check for threads.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Hitch Recommendation for a 2001 Subaru Forester
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is Included with Curt Trailer Hitch 12038 for a 2008 Subaru Forester
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Hitch Receiver Sizes
- Q&A: Replacing 5-Wire, 4-Way Wishbone Trailer Connector w/4-Wire Connector Causes Lights to Fail
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Diameter, Maximum and Minimum Height for Air Bags in Firestone Ride-Rite System # F2071
- Q&A: Replacement Bearings and Hub For 2007 EZ Loader Trailer Model With BT150A Oil Bath Hub
- Q&A: Replacement Oil and Grease Seals For PHLE AP3137N2 Oil Seal
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision