Availability of a 15 x 6 Mini Mod Trailer Wheel with a 5 on 5-1/2 Bolt Pattern

Question

Question:

Why isnt this wheel made in 15 x 6 5 on 5 1/2? I only can find them in the 15 x 5 size.

asked by: ERNEST

0

Expert Reply:

One reason is that the 5 on 5 1-2 bolt pattern is not very common any more. We only have one wheel with this bolt pattern and it is 15 x 5 is # TA37RR.

If you happen to have 205/75-15 tires, F78-15, or G78-15 tires, these will all fit a 15 x 6 inch wheel.

expert reply by: Michael H

0

Answer 1

Most trailer wheels have a zero offset. This is because a zero offset allows the wheel to handle the maximum load by distributing the the load equally to both sides of the wheel. To determine if your trailer wheels have an offset, you will want to…

view full answer...

Answer 2

The 5-on-5-1/2-inch wheel bolt pattern is pretty rare these days. We do not offer any pre-mounted tire/wheel products with this bolt pattern but we do offer a 15-inch wheel alone, part #TA37RR. This 15 x 5-inch wheel accepts trailer tire size…

view full answer...

Answer 3

Since you have a bolt pattern of 5 on 5-1/2 inch (this is not a common bolt pattern), we only have one wheel available that will fit your hub. We have the Vesper Trailer Wheel w/ Offset - 15" x 5" Rim - 5 on 5-1/2 - #TA37RR. Since these are…

view full answer...

Answer 4

I may have found a wheel that will work for you. The Vesper Steel Wheel, #TA37RR, is a 15 inch wheel that has the 5 on 5-1/2 inch bolt pattern. This wheel has a capacity of 2,160 lbs and has a center pilot hole that measures 4-1/4 inches. The wheel…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Availability of a 15 x 6 Mini Mod Trailer Wheel with a 5 on 5-1/2 Bolt Pattern

Product Page this Question was Asked From

Continue Researching