Is there a Way to Replace Slide On Demco DA91 Disc Brake Actuator For No Coupler Drop?
Question:
8750411 bought for my boat trailer . Unfortunately I found out after all was hooked up and tested that the drop hitch style was a bad idea for hooking up . Raised trail tongue height even with a 5 drop receiver. My question is can I purchase a straight tongue to put into this hitch with out any issues? And if not what would be another model that I can go to that has the disc brake style hitch with electric lock out thx
asked by: Chris M
Expert Reply:
We do have the Replacement Inner Slide # DM12808-97 you could use with the Demco Trailer Coupler # DM15791-97 on your Demco Hydraulic Brake Actuator # DM8750311. This would allow you to position the coupler at several different heights to best level your trailer.
Otherwise you would have to drill new holes for the Actuator # T4747220 which has a straight coupler out of the actuator.
Products Referenced in This Question
Replacement Inner Slide for Demco DA91 Actuators - Primed Finish
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Slides
- Demco
more information >
Demco Trailer Coupler - Cast - Adjustable Channel - eZ-Latch - Primed - 2-5/16" Ball - 21K
- Adjustable Trailer Coupler
- Coupler Only
- 21000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Auto Latch
- Demco
more information >
Dexter Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 8K
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Demco
more information >
Continue Researching
- Q&A: Recommended Replacement Wheel and Tire for a 7.5-10 Tire
- Q&A: Will 14" Diameter Trailer Wheels fit On The DeeMaxx Disc Brake Kit # DE66YR?
- Q&A: Mounting Hole Dimensions of Demco DA91 Surge Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement Pontoon Boat Trailer Surge Brake Actuator With Drop Coupler
- Q&A: Replacement Bearing Kit and Brakes for a 2003 Boat Trailer with 3,500 lb Axles
- Q&A: Length of 20k Demco Hydraulic Brake Actuator DM8204311
- Q&A: Will DeeMaxx Disc Brake Kit Fit 2021 Coyote Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Hand Winches
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
Chris M.
5/17/2024
That replacement looks like it goes down for adjustments. I would need one to be more neutral or even go up for adjustments. If there is a like replacement. If not then the one I took off is more like the Dexter straight hitch I could go back to . Just didn’t think with drum brakes and upgraded to disc brakes that I still needed to change out actuator. But if other options plz advise thanks