Recommended 5 on 4-1/2 Idler Hub for a Dexter D20 Axle
Question:
I have a Jayco Jay 8 with 4 stud hubs and I would like to replace the hubs with 5 stud hubs to give me more wheel/tire options. The axle part is 2475920. Can you direct me to the correct hub to purchase? I do not need electric brakes. Pic of axle sticker attached. Thank you!
asked by: Daniel B
Expert Reply:
Thanks for the picture and your patience! I just heard back from Dexter and your D20 axle uses the same inner and outer bearing of 1.063" which is item # L44649. I recommend the Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-545-2-LF-2K or item # AKIHUB-545-2-LFEZ-2K if you have an EZ lube axle. Both of these idler hubs are sold individually and have a 5 on 4-1/2 lug pattern.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 2200 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Spring Seat for a 2,200 lbs Axle w/ a 1-3/4" Diameter
- Article: Trailer Wiring Diagrams
- Search Results: 8~258~5uc1~ez
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Q&A: Adding Brakes to a 2015 Jayco Jay Sport 8SD
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Article: Trailer Tire Sizing
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: 25580
- Shop: Trailer Wiring
- Shop: Gooseneck Hitch
- Q&A: Seal With Dimensions to Replace 171255UC
- Article: Most Popular Wheel Bearings
- Search Results: 68149
- Video: Choosing the Right Trailer Wiring
- Search Results: dust cap
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch
- Search Results: 15123