Are There 3,500 lb Axles With 89 Inch Hub Face to Hub Face Measurement Without Spring Seats

Question:

Do you have any trailer axles that are 89” hub to hub, but without the spring saddles welded on? It would be a 3.5k or 5k setup. Bolt patter doesn’t matter. I am rebuilding a car trailer. Do you have two axle kits with suspension? Thanks.

asked by: Chad

Expert Reply:

Hi there Chad; there are actually not any 3,500 lb axles with an 89 inch hub face to hub face measurement that does not have spring seats welded on. The ones we offer do have the spring seats welded on at 74 inches apart. That said, if you need spring seats at a measurement different than the 74 inch spacing you can have new ones welded on with the Spring Seat # TRSS238.

We don't have two axle kits with suspension but there are a couple options for 89 inch, 3,500 lb axles with hub and drums plus electric brakes; one is standard and the other has a 4 inch drop:

- Standard (no drop): Trailer Axle w/ Electric Brakes # e43SR

- 4" Drop: Trailer Axle w/ Electric Brakes # e95SR

The hubs on both of these have a 5 on 4-1/2" bolt pattern, which is the most common so finding wheels will be super easy.

expert reply by: Kyle S