Mounting Bolt Hole Dimensions of Dexter DX7.5L A-60 Brake Actuator For Disc Brakes

Question

Question:

Hello, I am looking at Item DX56FR and I am curious what the mounting bolt hole dimensions are. I think this is a direct replacement for the Karavan boat trailer I have but I would like to know how far apart the mounting bolt holes are and how far down from the top they are. I tried to find this information on the manufacturers website but I cant find this actuator assembly there.

asked by: Scott D

0

Expert Reply:

Hey Scott, the bolt holes of the Dexter DX7.5L A-60 Brake Actuator w/ Electric Lockout - Disc # DX56FR are 3" apart horizontally and 2-1/2" apart vertically. The holes are 5/8" from the top and bottom of the actuator.

expert reply by: Kyle S

0

Answer 1

Your surge coupler will have either a sticker or an engraving on it, typically near where the coupler is located. If you can get me that information and what you're needing to replace on it I'd be more than happy to help you find…

view full answer...

Answer 2

The correct replacement actuator for your UFP 34034 is the Dexter DX7.5L A-60 part #DX56FR.

view full answer...

Answer 3

There are several different surge brake options but I would need to know a bit more of what you have exactly to give you the best replacement option. First do you have Disc or Drum trailer brakes. Next I need to know the maximum weight your trailer…

view full answer...

Answer 4

If the cap of your Titan Model 60 actuator part #T43397007K is shooting fluid out of the filler cap one of two things is happening. Either there is a clog somewhere on your brake lines or the master cylinder is having some type of problem. The…

view full answer...

Answer 5

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX56FR you were looking at is confirmed to work with tandem axle trailers like yours, and is a great option as long as your trailer uses disc…

view full answer...

Answer 6

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 7

At this time we do not carry a compatible inner member for your Reliable ACT 7.5 KS actuator so I recommend replacing it with the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX89FR. This hydraulic actuator activates trailer's brakes…

view full answer...

Answer 8

Thank you for the photos. From what I can find, you currently have a Reliable ACT-7.5K brake actuator. Unfortunately, we don't carry replacement parts for your Reliable brake actuator. The best option that we can provide would be to replace your…

view full answer...

Answer 9

I've looked through the various replacement master cylinders we offer, and couldn't find anything that matches your photo. I found out that Reliable stopped manufacturing brake actuators several years ago, and replacement parts aren't…

view full answer...

Answer 10

Thanks for the pictures! It looks like you have a TCIC 23361 master cylinder. The Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators item #T4395100 is the replacement for it. However, this is a drum brake master…

view full answer...

Answer 11

Thanks for the photo. Your master cylinder looks like the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 or if you have disc brakes #T4820000. I've linked the page to all your replacement…

view full answer...

Answer 12

I went out to our warehouse for you and took the measurements that you requested. I have attached these for you below in a photo. The bolt holes on the Replacement Master Cylinder Assembly part #T4820000 are 3-5/8" long x 1-5/8" wide. The…

view full answer...

Mounting Bolt Hole Dimensions of Dexter DX7.5L A-60 Brake Actuator For Disc Brakes

Product Page this Question was Asked From

Continue Researching