Converting 3,500 lb Torsion Axle to Spring Leaf Axle on Boat Trailer
Question:
I have a 2010 Magic Tilt boat trailer for a 22 center console with a dry weight of 2200 lbs. The trailer currently has center torsion axles that are rated for 3500lbs each. They are completely shot and they are very expensive. I would like to see if it is possible to convert to a straight axle with leaf springs. Could you help me please? Thanks Sam
asked by: Sam P
Expert Reply:
Hey Sam; thanks for the question and yes it is possible to go from a 3,500 lb torsion axle to a spring leaf axle on your boat trailer. You'll need to have new hangers welded on, as well as get leaf springs and, of course, the axle itself. For the hanger kit you can go with the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear # APS4 which gives you 5 inches of distance between the center of the axle and the trailer frame.
For 3,500 lb leaf springs you can use the 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/8" - Dacromet # e68SR, which are rust-resistant, making them perfect for a boat trailer. To mount the axle you'd also need U-Bolt Kit # CE23002.
The axle is going to take some measuring as you need to know the distance from hub-face to hub-face to get the right fit. For example the Dexter Trailer Axle with Idler Hubs # 35545I-ST-89 measures 89 inches from hub-face to hub-face. I have added a link below to our entire selection of 3,500 lb axles for you as well.
![Kyle S](https://images.etrailer.com/static/images/catg/people/1237_tn.jpg)
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- CE Smith
more information >
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/8" - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/8 Inch Long
- Dacromet
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On - 2" x 6' - 1,167 lbs - Qty 2
- Shop: CargoBuckle G3 Retractable Ratchet Straps w/ E Track Adapters - 2" x 6' - 1,167 lbs - Qty 2
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure a Trailer Axle
- Search Results: trailer valet
- Search Results: cargobuckle
- Video: Dexter Trailer Axle with Idler Hubs Review
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Q&A: Switching Trailer from Torsion Axles to 3,500 lb Leaf Spring Axles
- Q&A: Solution for Replacement Axles for Trailer With Tandem Torsion Axles
- Search Results: double eye springs
- Search Results: disc brakes
- Search Results: equalizer
- Search Results: galvanized axle
- Video: Trailer Valet 5X Swivel Jack and Trailer Mover Review
- Video: Trailer Valet RVR5 Remote-Controlled Trailer Dolly Review
- Video: CargoBuckle G3 Retractable Ratchet Tie-Down Straps Review
- Video: CargoBuckle E-Track Adapters G3 Retractable Ratchet Straps Review
- Q&A: Can Trailer Valet Be Used on Inclines
- Q&A: What is the Correct Direction of Pull for the Erickson E-Track
- Q&A: Optimal Direction of Pull When Using E Track
- Q&A: Can the Trailer Valet XL Be Used on Gravel Inclines
- Search Results: dolly
- Article: How to Tie Down a Motorcycle
Sam P.
4/4/2024
Thank you for your quick response can hanger be bolted on since the trailer rails are aluminum? Sam