Is Stainless Steel of InfiniteRule Hitch Lock Weldable

Question

Question:

WHAT STAINLESS STEEL TYPE ARE THE INFINITERULE HITCH LOCKS MADE OF ? ARE THEY WELDABLE ?

asked by: William C

0

Expert Reply:

Hey William, InfiniteRule states their hitch locks like the part # 34061071-D are made from "high strength" 303 stainless steel and is definitely weldable based on that.

expert reply by: Jameson C

0

Bill

4/1/2024

ALL STAINLESS STEEL IS NOT WELDABLE ! IF ITS TYPE "303" IT IS NOT WELDABLE. TOO HIGH SULPHER CONTENT. IT'S FREQUENTLY USED IN ITEMS LIKE THIS BECAUSE IT MACHINES WELL. SO AGAIN I NEED TO KNOW THE TYPE STEEL USED. 304 ? , 316 ?, 18-8 ? THANKS, I NEED TO KNOW

Reply

Jameson C.

4/2/2024

@Bill Hey so I just heard back from InfiniteRule and the steel is 303 stainless steel. That means it's weldability is listed as "poor" but it does seem like it is possible.

Reply

Answer 1

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 2

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 3

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

Answer 9

In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to…

view full answer...

Answer 10

The "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part #RM76511. This product will make it easy to deactivate this circuit, you will only need to flip a switch instead of…

view full answer...

Answer 11

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 12

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Is Stainless Steel of InfiniteRule Hitch Lock Weldable

Product Page this Question was Asked From

Continue Researching