Replacement Hub for 2007 BRTR Boat Trailer ABV6217

Question

Question:

I am looking to purchase an intact hub for my boat trailer. Best I can tell is that it is a 2007 BRTR model ABV6217. The race and bearing are L44610 and L44649. The seal is 1.50 Id and 1.987 od. Please let me know my options and if I need any more information. Thanks, Les

asked by: Les W

0

Expert Reply:

Hey Les, thanks for the info you mentioned from your old hub. Based on that the part # AKIHUB-545-2-G-EZ-2K would work great as a replacement. This is also galvanized which means it will do a great job fighting corrosion as well.

expert reply by: Jameson C

0

Answer 1

The replacement hub assembly will depend on the size and weight rating of the axle. We have many options for hubs for 2,000 lb axles if it is that light of a trailer. This is the smallest axle size we offer replacement hubs for. I have provided the…

view full answer...

Answer 2

For a replacement hub to fit on a spindle it must use the same bearings as the original hub. Sometimes bargain trailers use odd sizes of bearings that are not readily available and so it can be tough to find suitable hubs, but you can check by…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 6

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Hub for 2007 BRTR Boat Trailer ABV6217

Product Page this Question was Asked From

Continue Researching