Is Reese Pro Weight Distribution Hitch Right For Coleman 17B Travel Trailer w/ 500 lb Tongue Weight

Question

Question:

Hello, I have a Coleman Travel trailer 17B with a dry weight of 3,100lbs. As for my vehicle, I have a 2023 Tacoma SR V6. What would be the recommended distribution hitch? I believe the tongue weight is between 400-500lbs. I was looking into buying the Reese Pro PN:RE34FR. But I would like to make sure this is suited for my vehicle, or a better option. Thank you, Jaime

asked by: Jaime

0

Expert Reply:

Hi there Jaime; thanks for the question and you are right on the money for the Reese weight distribution hitch that will work with your Coleman 17B:

- Reese Pro Round Bar Weight Distribution # RE34FR

This is rated for tongue weights between 200 lbs and 600 lbs, so your 400-500 lb tongue weight is right in the middle, which is exactly what you want.

This is a solid, no-nonsense option that will give you solid sway control and already has the 2-5/16" hitch ball installed, which will save you a lot of time, as installing that ball can be a real pain. So you made a real nice choice here with the # RE34FR.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Is Reese Pro Weight Distribution Hitch Right For Coleman 17B Travel Trailer w/ 500 lb Tongue Weight

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching