Replacement Grease Seal And Bearings For A Karavan Boat Trailer KBE-1250/900-46
Question:
I need help identifying correct bearings and grease seals for a Karavan Boat Trailer. Model KBE-1250/900-46. SKTBS1811GF534891. Year 2016
asked by: Mark S
Expert Reply:
Hi Mark,
Karavan unfortunately doesn't list the bearings and grease seal so you'll have to remove the hub and check the grease seal and bearings for a part number. The face of the seal and bearings should have a number stamped into them but it can wear over time. To get to the inner bearing you will have to remove the grease seal so that you can get to it so the hub will have to stay off until you get replacements.
If the part number has worn away then the next step would be to measure the spindle at points B, C, and D from the diagram below with a pair of calipers # PTW80157. Once you have these measurements I'd be happy to look for compatible replacements.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Roadmaster Guardian Rock Guard for Towed Vehicles
- Accessories and Parts
- Tow Bar
- Vehicle Guards
- Rock Guard
- Guardian
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: karavan trailer parts
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: 4" Carbon Fiber Digital Caliper
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Search Results: karavan~parts
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Q&A: How to Find the Spindle Number on a Trailer Axle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Availability Of a 3/4 Diameter Spindle For 8 Wheels With Integral Hubs
- Q&A: Brackets To Install Bunks on 2010 Karavan # KBE-1250-46 Boat Trailer
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: l44649
- Search Results: 84 spindle l44649/l68149 bearings 10~19 double lip seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Trailer Wiring
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Shop: Brake Controller