How Much Weight Can The Hollywood Racks Trail Rider Bike Rack # HR200Z Carry?

Question

Question:

How much weight can it hold ?

asked by: John P

0

Expert Reply:

The Hollywood Racks Trail Rider Bike Rack # HR200Z can carry 2 bikes up to 45lbs per bike. Do understand the 45lbs is per bike so if you had a 20lb bike it would not mean you could also carry a 70lb bike for the difference.

expert reply by: Bud M

0

Answer 1

At one point the Saris Freedom bike rack you mentioned was listed as a fit for Class I hitches but recently it was changed to Class II only. So for an E-bike rack that does fit a Class I hitch the best option is the Thule EasyFold part #TH903202.…

view full answer...

Answer 2

The Hollywood Racks TrailRider part #HR200Z that you referenced is a great choice for you. It is confirmed to work at the back of motorhomes like your Winnebago View G and in it's price range it's hands-down the most stable and solidly built…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

How Much Weight Can The Hollywood Racks Trail Rider Bike Rack # HR200Z Carry?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching