How Far Inside RV Does Lippert SolidStep Sit When Folded Up

Question

Question:

How much space do these steps need when stowed? In other words, how many inches into the trailer is used?

asked by: Rocky H

1

Helpful Expert Reply:

Great question Rocky, so when the Lippert Solidstep part # LC713662 is folded up in the stored position it will take up 10 inches of space inside the doorway of your RV.

expert reply by: Jameson C

1

Answer 1

In order to determine a suitable SolidStep Manual Fold-Down RV Step for a Forest River R-Pod Travel Trailer you'll first need to measure the doorway width (inner most point to inner most point) followed by the threshold height (ground to…

view full answer...

Answer 2

For such a low "entry height" you will actually need to use scissor steps such as #AS02 since there isn't a SolidStep option that will work. These scissor steps will work with an entry height of 18 to 23 inches. I have…

view full answer...

Answer 3

The SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames - Double - Aluminum #LC713662 is roughly 22" wide when measured from the outside of each step frame, so you will be able to make this fit inside your 23-1/2"…

view full answer...

Answer 4

You have measured correctly, and it looks like if you stretched out that tape measure so it was in a perfectly straight line your doorway would be 24 inches, but even if it was a hair over that it would not affect the fit at all. Based on your 24…

view full answer...

Answer 5

While we do not carry that particular Lippert step we do have the similar MORryde #MR98RR or a better option in my opinion is the TorkLift GlowStep #TLA9104. I prefer this step as it folds up nicely and works better in tight areas like storage lots.…

view full answer...

Answer 6

I spoke with MORryde since the STP-017 is an OEM number and everything we offer is aftermarket and was found that that number should relate to the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways #MR26RR. I would just measure…

view full answer...

Answer 7

The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it won't increase the capacity of your trailer as the axle is still rated for that max capacity of 4,400 lbs. My recommendation for a…

view full answer...

Answer 8

I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…

view full answer...

Answer 9

As you can see on the attached photo, the wiring diagram for HydraStar Adapter #HBA-CAM shows there can be a 25-40 amp circuit breaker in-line with the black wiring which goes from the battery's positive terminal to the adapter. I would stick…

view full answer...

Answer 10

While we don't' have custom 5th wheel or rear hitch options for your 2005 Freightliner M2 106 you can mount the Reese low-profile hitch, #RP30054. It requires a little custom fabrication which is explain in the linked instructions. For a rear…

view full answer...

Answer 11

We do have a Lippert SolidStep that will fit, but the SolidStep Manual Fold-Down Steps for 25" - 28-7/8" Wide RV Door Frames #LC733931 are not the correct ones. Instead, you will want to use the SolidStep Manual Fold-Down Steps for 24"…

view full answer...

Answer 12

The Lippert SolidStep Fold-Down Steps like the 2-Step #LC733931 you were looking at are designed to fit specific doorway widths. Unfortunately trailer manufacturers don't make dimensions like this available so you will need to take a quick…

view full answer...

How Far Inside RV Does Lippert SolidStep Sit When Folded Up

Product Page this Question was Asked From

Continue Researching