Replacement Shroud for Dometic Duo-Therm AC on 2010 Keystone Bullet

Question

Question:

Hello. I have a 2010, Keystone Bullet 27” travel trailer. I cracked the AC shroud cover on top of trailer. I need a replacement. Unfortunately, I have no pics/or dimensions due to it being covered current weather. I do have the part number off the unit from INSIDE the trailer. I took off vent cover and see this number. 3107541.009 Looking to replace AC shroud cover. Thank you for any help!!!!

asked by: Mark

0

Expert Reply:

The 3107541.009 is the part number for the analog control kit for the Dometic Duo-Therm on your 2010 Keystone Bullet. Based on the information we have it does appear as though the # DMC69FR you looked at is the correct replacement. However, without the actual AC model number we can't be sure. I understand it is covered right now but I recommend measuring to confirm this. The shroud measures 34-1/2" long x 30" wide x 10-3/4" tall.

expert reply by: Robin H

0

Answer 1

Since you have a Dometic Duo Therm RV AC unit the correct replacement shroud is the part #DMC69FR.

view full answer...

Answer 2

The Quick Cool label on your shroud there is a sticker Dometic put on a bunch of different models. From the picture, it looks nearly identical to the #DMC69FR. The dimensions for this shroud are 34-1/2" long x 30" wide x…

view full answer...

Answer 3

Since you have the Dometic Duo-Therm air conditioner, the correct replacement shroud for you is the: -Replacement Shroud for Dometic Duo-Therm RV Air Conditioner #DMC69FR. Attached is a product overview video for you to check out.

view full answer...

Answer 4

Based on the SKU number you mentioned what you have is a Dometic Brisk Air II which the part #DMC46FR is the correct replacement shroud for.

view full answer...

Answer 5

Is there a brand on the AC unit? I can't find anything based on just the number you mentioned.

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 9

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

Surge brakes use a hydraulic actuator to push fluid to the cylinder piston to activate the brake shoes on drum brakes or brake pads on disc brakes. This pressure should only be applied when weight is pushing against the hitch ball, so no pressure…

view full answer...

Answer 12

The Blue Ox systems cannot be moved back that far but we do have the perfect system for you. Take a look at the Reese SC weight distribution systems linked to the right (minus the ones that say Light Duty). These systems have narrow brackets that can…

view full answer...

Replacement Shroud for Dometic Duo-Therm AC on 2010 Keystone Bullet

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching