How to Determine Correct Hub For Karavan PWC Trailer
Question:
Hi, Ive got a 2019 karavan move pwc trailer. I dont have a specific model # but it says karavan move 1 1500 long. I have very slight play on each wheel when under load if I try to move them back and forth. It is the same on both sides so may be normal but I am trying to find the correct hub replacement. This is what is stamped on the hub itself. Knott 6B7457 H 17F18 I do want one that is no assembly required and pre greased. Will this one work AKIHUB-545-2-EZ-1K? If not which do you recommend. Unfortunately I didnt know what the inner and outer bearing diameter is. Thanks!
asked by: Andy
Expert Reply:
You'll have to find the inner and outer bearing numbers as I could not find any hub matching the one you mentioned, and we don't have any way of knowing what hub is on your trailer. To do so you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.
If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the photo I added. If the bearings are L44643 or measure 1.00" exactly then you can use hub # AKIHUB-545-2-EZ-1K, or if they are L44649 bearings and measure 1.063" inner diameter you could use hub # AKIHUB-545-2-EZ-2K.
I've added a link below to all of our hubs for you to take a look at.
(click to enlarge)
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12" - 5 on 4.5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Trailer Idler Hub for 2K Axle - 5 on 4-1/2 - 8" - 12" Wheels - Zinc
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Taskmaster 4.80R12 Radial Trailer Tire - Load Range C
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: side marker trailer lights
- Search Results: 7~7
- Search Results: bearing l44643
- Search Results: apubr~10
- Q&A: Lug Nut Torque Rating for a 5-Lug Trailer Wheel
- Video: etrailer Trailer Leaf Springs Review
- Q&A: Correct Idler Hubs for 2013 Triton LT Single Jet Ski Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: How To Find Replacement Hubs for Triton LT PWC Trailer
- Q&A: What Size Lug Nuts are Used for a 5 on 4-1/2" Bolt Pattern
- Search Results: light grommet
- Search Results: bow stop bracket
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Q&A: Seal With Dimensions to Replace 171255UC
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Shop: Fifth Wheel Hitch
- Article: Trailer Tire Sizing
on Trailer Hubs and Drums
