Drilling Out Hole to Install Sealed 2 Inch Round Trailer Clearance and Side Marker Light MC-53RB
Question:
hello I have seen previous comment that a 2and5 16th hole is needed to mount the 2 inch marker light. I cannot find a 2and5 16th hole sawbit. Will another size work? all I can find is a two and 1/2 inchor a 2 inch. they are about 20 bucks apiece so I dont want to have to buy 2. Thank you
asked by: Rolan
Helpful Expert Reply:
A 2-1/2 inch hole saw would be too large for a 2-5/16 inch hole. So I recommend going with a 2 inch hole saw and gradually enlarging the hole with either the same hole saw or a rotary tool. Then you can do some test fits with the light until you get the hole just the right size so it fits.
To make sure you have the hole the right size you will want to first place it in the grommet, # A54GB, and then in the hole. Otherwise, if you just used the light or the grommet you would not get an accurate measure of if the light will fit or not.
This light also uses pigtail # A46PB. Black is the power wire and white is the ground.
Products Referenced in This Question
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 6 Inch Long
- Two Wire
- Right Angle Pigtail
- Optronics
more information >
2" Round Grommet - Flush Mount - Open Back
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 2 Inch Diameter
- Grommet
- Round
- Optronics
more information >
Product Page this Question was Asked From
Optronics Trailer Clearance and Side Marker Light - Submersible - Incandescent - Round - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- Incandescent Light
- 2 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Shop: Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens
- Article: Trailer Tire Sizing
- Shop: 2" Round Grommet - Flush Mount - Open Back
- Shop: Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Amber Lens
- Q&A: What Size Hole is Needed for Installation of 2 inch Round Trailer Clearance Light MC53RB
- Shop: Towing Mirrors
- Article: Trailer Wiring Diagrams
- Video: Review of OptiMate RV Solar Panels - Roof Mounted Solar Kit - MA29JR
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: CargoSmart Spare Tire Mount for E Track and X Track Systems
- Shop: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: PVC Grommet for Peterson 2" Round Clearance and Side Marker Lights - Flush Mount - Black
- Q&A: Can a 2-1/4 Inch Hole Saw Be Used to Mount the 2 Inch Round Grommet Part # A54GB
- Video: Optronics Trailer Lights A45PB Review
- Search Results: oval lights
- Q&A: Comparing Linxup GPS Tracking Devices and Compatible Phone Networks
- Q&A: Can Radial Tires And Bias Tires Be Ran Together On The Same Trailer
- Q&A: Spare Tire Recommendation for a ST175/80D13 Wheel and Tire
- Q&A: Can 12 Inch Wheels And Tires Be Replaced With 15 Inch Wheels And Tires On A Utility Trailer
- Q&A: GPS Tracking Devices for 4 Trailer Fleet Using an App for Easy Tracking
- Video: Blazer Complete Relay Wiring Kit with Toggle Switch Installation - Enclosed Trailer
- Search Results: 44649
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Video: Titan Trailer Brakes T2385200 Review
- Search Results: 68149
- Shop: Brake Controller
- Video: Choosing the Right Trailer Wiring