Cutout Hole Size Needed To Undermount The Better Bath RV Kitchen Sink # LC421572

Question

Question:

What is the cutout dimensions for this sink? Ordering a new countertop. Would like it to be an under mount.

asked by: Darby

0

Expert Reply:

If you're undermounting the Better Bath RV Kitchen Sink # LC421572 then you'll want to cutout hole to be between 12-7/8" and 14-1/2" deep and between 22-7/8" and 24-1/2" wide so that the lip can touch the countertop and be secured in place. The closer to 22-7/8" wide and 12-7/8" deep the less lip you'll see when looking down from the top of the countertop.

expert reply by: Kevin C

0

Dimensions
(click to enlarge)

Answer 1

The Better Bath Single Bowl RV Kitchen Sink part #LC421572 is designed to fit a rectangular opening of at least 13 1/8" by 23 1/8". If your opening matches this or is not more than 1 1/8" larger than that this would be a…

view full answer...

Answer 2

The overall dimensions of the Better Bath RV Kitchen Sink part #LC421572 including the lip are 25" long x 15" wide x 7" tall. The lip is 1" so if you wanted the bowl dimensions that would be 23" long x…

view full answer...

Answer 3

There is not a stainless steel sink protector that is made specifically for the Better Bath Single Bowl RV Kitchen Sink #LC421572. I'm sure there is one that will work but nothing that is offered here, you just need to find one that fits…

view full answer...

Answer 4

Yes, the Better Bath Single Bowl RV Kitchen Sink #LC421572 referenced in your question will fit into a 24 inch x 14 inch opening. Its dimensions excluding the outer flange are 22-7/8 inches long, 12-7/8 inches wide, and 6 inches deep. With the outer…

view full answer...

Answer 5

Yes, the Better Bath Single Bowl RV Kitchen Sink #LC421572 is going to fit your 14-1/2" x 24" opening. For a drop in installation you'll just need some silicone caulk to mount the sink to the counter. For the drain you'll want one…

view full answer...

Answer 6

The Better Bath RV Kitchen Sink #LC421572 is 25" long x 15" wide with the lip and 22-7/8" long x 12-7/8" wide without the lip. So the lip on the sink is just over 1". So if your opening is 24" x 14", you will see…

view full answer...

Answer 7

If you're undermounting the Better Bath RV Kitchen Sink #LC421572 then you'll want to cutout hole to be between 12-7/8" and 14-1/2" deep and between 22-7/8" and 24-1/2" wide so that the lip can touch the countertop and be…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…

view full answer...

Answer 10

Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

The black wire from the break away switch will connect to the blue wire from the break away box, as shown in the provided diagram. By 'brake wires' I'm assuming you're speaking of the wires connected to the brake magnets on your brake…

view full answer...

Cutout Hole Size Needed To Undermount The Better Bath RV Kitchen Sink # LC421572

Product Page this Question was Asked From

Continue Researching