What is the Best Hitch for a 2024 Subaru Crosstrek?
Question:
Need your best hitch for a 2024 Subaru Crosstrek.
asked by: Gloria
Expert Reply:
The best hitch for a 2024 Subaru Crosstrek is the etrailer item # e98912. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
The reason this is the best hitch is because the crosstube mounts completely behind the rear bumper. This leaves only the 2" receiver visible. Not only does this help with ground clearance but it also looks much better. On top of that the flat matte finish will blend in better beneath your Subaru's trim then the glossy finishes on the Curt item # C13382 or Draw-Tites item # 76209.
I have attached a couple of pictures below along with an installation video to help you get this hitch set up and show you what it looks like once installed.
Please note that the etrailer item # e98912 hitch does not fit the hybrid models. If your 2024 Crosstrek is a hybrid the only option to add a hitch is to use the Draw-Tite item # 76209.
If you are planning on towing you will also need a wiring harness item # C56040 and a ball mount kit item # C45534.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Do I Need Additional Fuses for the Main Fuse Box on a 2024 Honda Pilot to Power a Wiring Harness?
- Q&A: Is The EcoHitch Trailer Hitch Receiver # 306-X7365 Hidden Completely on 2024 Crosstrek Wilderness?
- Q&A: Size of Bolts on etrailer Trailer Hitch Receiver e98912
- Q&A: Is There A Hitch Made Specifically For The 2024 Subaru Crosstrek Wilderness?
- Q&A: Comparing Draw-Tite and Curt Trailer Hitches for a 2020 Subaru Crosstrek
- Article: Rooftop Cargo Carriers
- Q&A: Recommended Hitch for a 2023 Subaru Crosstrek Hybrid
- Article: Performance Chips and Modules
- Article: Trailer Wiring Diagrams
- Article: Trailer Hitch Installation Tips
- Article: Determining Trailer Tongue Weight