Does EcoHitch # 306-X7284 Fit 2013 Volkswagen Jetta Sportwagen TDI

Question

Question:

I have had three of your experts on live chat and have had three different answers two said that the eco hitch would fit my 2013 VW Jetta TDI sport wagen and one said that it would not fit. $400 is a lot of money when the experts can not agree. I also need to know where I can have this installed if it does fit.

asked by: Marshall

0

Expert Reply:

I apologize for any confusion but the EcoHitch part # 306-X7284 does for sure fit your 2013 Volkswagen Jetta SportWagen. I attached a link on this page that shows where you can find local installers as well.

expert reply by: Jameson C

0

Answer 1

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 2

The serial number and VIN are typically printed on a label or plate placed somewhere on the trailer's pole tongue, although it could possibly found elsewhere on the trailer frame, possibly on the inside edge of the frame so it's more…

view full answer...

Answer 3

The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs #DL24239 or…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 6

The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.

view full answer...

Answer 7

TorkLift's EcoHitch #306-X7284 that fits your 2012 Jetta Sportwagen TDI will require fascia trimming as part of its overall installation. Please refer to the linked photo taken from the written instructions that will ship with the hitch. This…

view full answer...

Answer 8

I apologize for any confusion but the EcoHitch part #306-X7284 does for sure fit your 2013 Volkswagen Jetta SportWagen. I attached a link on this page that shows where you can find local installers as well.

view full answer...

Does EcoHitch # 306-X7284 Fit 2013 Volkswagen Jetta Sportwagen TDI

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching