Recommended Front Mount Hitch for a 2023 GMC Sierra 1500 w/ a Diesel Engine

Question

Question:

Will this fit the 2023 GMC Sierra AT4 3.0 diesel?

asked by: Allen N

0

Expert Reply:

Yes, it does. I checked with Draw-Tite and I can confirm that the Draw-Tite Front Mount Trailer Hitch item # DT44HR does fit the 2023 GMC Sierra 1500 AT4 with the 3.0 diesel engine. This front mount hitch is custom fit and bolts to your Sierra with included hardware.

expert reply by: Jerred H

0

Answer 1

Draw-Tite's fitment guide has no stipulations on sub models for the 2023 GMC Sierra 1500 so you would be able to install the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. You will have to trim the fascia and if you have an AEV or Warn…

view full answer...

Answer 2

Our fitguides get updated regularly when we get new information from our techs after they do installs. There has been a revision to the fitment of the Curt item #C31088 front end hitch on the 2021 GMC Sierra 1500's. It no longer fits and the…

view full answer...

Answer 3

The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR will fit your 2019 Chevrolet Silverado 1500 with the 2.7L turbo. It has the taller brackets to clear the intercooler for your turbo engine. Be sure to get a Draw-Tite QSP Trailer Hitch Silencer…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Recommended Front Mount Hitch for a 2023 GMC Sierra 1500 w/ a Diesel Engine

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching