Front Mount Trailer Hitch Receiver Compatible 2019 Chevrolet Silverado 1500 2.7L Turbo 4 Cylinder

Question

Question:

I am looking from a front end hitch for my 2019 Silverado,with2.7 turbo

asked by: David O

0

Expert Reply:

The Draw-Tite Front Mount Trailer Hitch Receiver # DT44HR will fit your 2019 Chevrolet Silverado 1500 with the 2.7L turbo. It has the taller brackets to clear the intercooler for your turbo engine.

Be sure to get a Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080. This will cover the hole to reduce any whistle that you normally get with the open receiver and it will allow you to remove the rattle from hitch mounted accessories so you do not see that distraction while you are driving.

expert reply by: Bud M

0

Answer 1

Yes, according to our installation technicians, you will have to do some trimming to the fascia and the front air dam to install the Curt Front Mount Trailer Hitch Receiver #C31088 on your 2021 Chevrolet Silverado 1500.

view full answer...

Answer 2

Yes, The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR is confirmed to fit your 2022 Chevrolet Silverado 1500 LTD with a 2.7 Turbo. This front mount hitch has an easy, bolt-on installation with no welding required. It has a black powder coat…

view full answer...

Answer 3

Our fitguides get updated regularly when we get new information from our techs after they do installs. There has been a revision to the fitment of the Curt item #C31088 front end hitch on the 2021 GMC Sierra 1500's. It no longer fits and the…

view full answer...

Answer 4

Yes, it does. I checked with Draw-Tite and I can confirm that the Draw-Tite Front Mount Trailer Hitch item #DT44HR does fit the 2023 GMC Sierra 1500 AT4 with the 3.0 diesel engine. This front mount hitch is custom fit and bolts to your Sierra with…

view full answer...

Answer 5

Draw-Tite's fitment guide has no stipulations on sub models for the 2023 GMC Sierra 1500 so you would be able to install the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. You will have to trim the fascia and if you have an AEV or Warn…

view full answer...

Answer 6

I can certainly help you with that. Since the Curt T-Connector Vehicle Wiring Harness, part #C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights,…

view full answer...

Answer 7

This is a great question. All of the Air lift kits you mentioned do fit your 2023 Chevy Silverado 1500 with the difference being the part #AL57288 is the standard air bag kit, and the part #AL88288 has internal jounce bumpers to provide additional…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...