Replacement Boat Winch For Fulton T1801 Unable To Get Replacement Parts For  

Hey Ryan, yeah you're right TDE is no longer a thing and unfortunately we don't carry a replacement reverse solenoid for that actuator so at this moment your best bet would be to replace the entire thing with the Dexter DX7.5L A-60…

The Dexter drop-n-go #099-175-20 would definitely have the same capability as your TDE actuator, provided it is a disc brake setup. TDE is no longer in business so I'm afraid finding a direct replacement will be impossible. My main concern is…

We have the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX29FR for disc brakes and the Dexter DX7.5L A-60 Brake Actuator #DX27FR for drum brakes. These will have similar bolt patterns as the Tie Down Engineering LP7000 actuators we have…

From what I found your 1991 Chaparral 1900 Bowrider weighs 2,200 lbs so it is likely the 3,250 lbs is the GVWR of the trailer. The best option for a winch that will have plenty of capacity is the following: - 2-Speed Boat Trailer Winch #315-W2500D…

It sounds as though there is a short or something is mis-wired. Using a circuit tester, like the #PTW2993, check the connection points in the vehicle side connector, to see if there is constant power on the running light circuit (brown wire on the…

I suspect your problem is caused by a damaged or corroded trailer connector. Take a look at your trailer connectors, both the socket on your truck as well as the plug on the trailer. Look for green or white corrosion on the pins or sockets of the…

If you are wanting to replace the entire surge brake actuator on your Four Winns Horizon 190 boat trailer then I have exactly what you will need. I recommend using the Dexter Disc Brake Actuator part #099-175-20. This actuator works with 2"…

I'm guessing it is approximately 3-3/8" across if you measured it. Unfortunately there are no options that will slide in because it won't line up correctly, and everything is designed to fit a 3" tongue so it is too wide to mount an…

To replace your TDE Model LP7000 actuator, I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout item #DX89FR. This coupler is designed to mount on top of a standard 3" wide trailer tongue. It measures right at 3-3/8" wide so…

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…