Replacement Tarp for TruXedo Lo Pro on 2021 Toyota Tundra

Question

Question:

Hello, Do you carry a replacement tarp for a Truxedo low pro for a 2021 Tundra with the 5.5’ bed? I can’t seem to easily find one on your site, but it appears you carry tarps for most vehicle configurations. Thanks

asked by: Mark S

0

Expert Reply:

We do have a replacement tarp for your TruXedo Lo Pro on your 2021 Toyota Tundra. If you have the # TX563701, which is designed to fit models without the deck rail system, the correct replacement tarp is the # TX5637-CVR. If you have the # TX563801 for models with the deck rail system you need the # TX5638-CVR instead.

expert reply by: Robin H

0

Answer 1

I see that there are 2 different TruXedo Lo Pro Soft Roll-up Tonneau Covers for your 2016 Toyota Tundra CrewMax with a 5-1/2' bed. If your Tundra has the Deck Rail System you have the Tonneau #TX563801 which uses the Replacement Cover…

view full answer...

Answer 2

Based on both the photo and description you provided, it looks like you have the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover which is part #TX563701 if you do not have the factory deck rail system or part #TX563801 if you do have the factory deck…

view full answer...

Answer 3

In order to choose the correct replacement tonneau cover for your 2010 Toyota Tundra, I would need to know if you have the factory deck rail system or not. For vehicles without the factory deck rail system, the replacement tonneau cover for the…

view full answer...

Answer 4

Yes we do have a replacement tarp for the Truxedo TruXport #TX297601 with the part #TX2976-CVR.

view full answer...

Answer 5

Thanks for the information. I checked with TruXedo and to replace just the cover on your 2012 Ford F-150's 5-1/2' bed you will need the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover item #TX5671-CVR. You will want to put…

view full answer...

Answer 6

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 7

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Replacement Tarp for TruXedo Lo Pro on 2021 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching