Replacement Wheel and Tire for Trailer with 5.70-8 on 5 lug Wheel
Question:
Hi. This is a followup to my original question posted at link below. Pictures to hopefully give the specs needed are attached to this submission. Also - considering the cracking in the pictured tires sidewall, should I be looking to get new tires on the trailer and not just a spare?
asked by: Ben P
Helpful Expert Reply:
Thanks for your pictures. From that I can tell you have a 5.30-8 wheel and tire with a 5 on 4-1/2 inch bolt pattern so for a spare/replacement you would want the part # AM30156. Since your sidewall is cracking it would be a good idea to have replace them all.
Product Page this Question was Asked From
Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range D
- 5.70-8
- 8 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Trailer Tire Recommendations for a Trailer Towed by a Motorcycle
- Article: Measuring a Trailer Tire
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: What is the Offset of a Trailer Wheel
- Q&A: Smaller Trailer Tire Than 215/75R14 w/ 5 on 4-1/2" Bolt Pattern To FIt in Garage
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: Can I Upgrade from a 4.800/4.00-8 Tire to a 5.7/8-8 Tire on a Time Out Tent Trailer
- Article: Overview of Lubricating Grease
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern