Recommended Hitch for a 2024 Kia Carnival

Question

Question:

I need a hitch with a 2" receiver for a 2024 Kia Carnival. Which is the best one for my van I see a couple of different options?

asked by: Ashley

0

Expert Reply:

The best hitch for your 2024 Kia Carnival is going to be the Curt Trailer Hitch item # C67ER. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight.

I have attached a couple of pictures below, along with an installation video, so you can see what this hitch looks like when installed.

If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.

I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.

expert reply by: Jerred H

0

Recommended Hitch for a 2024 Kia Carnival
(click to enlarge)

Answer 1

Yes, it will! The Draw-Tite Hitch item #DT34GR has been confirmed to fit the 2024 Kia Carnival. This hitch is custom fit and bolts to your van with included hardware. It is a class III hitch with a 2" receiver it has a 4,000 lbs towing…

view full answer...

Answer 2

Thule has a Wingbar Edge roof rack that fits your 2022 Toyota Highlander with the part numbers #TH69FE, #TH29SC, and #TH22R. This is the most versatile and quietest roof rack available for your vehicle.

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C67ER will fit your 2024 Kia Carnival as well!

view full answer...

Answer 4

Let's start off with the trailer wiring for your 2020 Kia Telluride, and to add a 7-way the first thing you will need to begin with a 4-way, and the best, most reliable option for that is the Curt T-Connector Vehicle Wiring Harness #CU94FR, which…

view full answer...

Answer 5

It sounds like you have the older hub 22834 that is no longer in production that takes the outer bearing of part #1779 and inner bearing of part #2788. I was not able to find any other bearings that measure .093" inner diameter besides 1779 or…

view full answer...

Answer 6

We have the grease seal you are looking for. Our part number #GS-2250DL is the same as the Dexter 010-054-00 that you have. The inner diameter of this seal is 2.25 and the outer is 3.376 inches.

view full answer...

Answer 7

To add a 2" hitch to your 2023 Kia Carnival, I recommend the etrailer Hitch item #e36KR. This hitch is custom fit and bolts directly to your Kia with included hardware. The etrailer Hitch item #e36KR is a class III hitch, with a 2"…

view full answer...

Answer 8

The best option we have for load stops on the TruXedo Elevate Truck Bed Rack System is the Load Stops for Rhino-Rack Vortex Aero Crossbars part #RRRLH2. These are channel mounted load stops which slide into the t-track on top of the crossbars.

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Recommended Hitch for a 2024 Kia Carnival

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching