Axle-Less Suspension And Electric Brake For Trailer
Question:
I am planning to buy this product for our trailer. But i need a hub with a bolt pattern of 5x5.5 also with electric brake. May i know also the prices. Thanks a lot.
asked by: Noel C
Helpful Expert Reply:
I see that you referenced part # ASR5200S01, a 5200 lb axle-less system for your trailer. The Axle-Less systems we offer have bolt patterns of either 5 on 4-1/2 or 4 on 4. We do not currently carry any axle-less systems that have a 5 on 5-1/2 bolt pattern with that weight capacity. I spoke with my contact at Timbren and they told me they do not offer the 5 on 5-1/2 bolt pattern. I have attached a help article that shows how to measure the bolt pattern of a wheel.
If you are able to use a reduced weight capacity system on your trailer, I may have a solution for you. The system I recommend has a 3500 lb capacity and is the Timbren Axle-Less Trailer Suspension System Straight Spindle, part # ASR3500S05. You could then use the Dexter Trailer Hub And Drum, part # 84557UC3. This hub and drum includes the bearings, races, grease cap, seal, lug nuts and wheel bolts, and has a 5 on 5-1/2 wheel bolt pattern.
The brakes I recommend are the Nev-R-Adjust Electric Brake Assembly, part # 23-468 for the left hand and part # 23-469 for the right hand. The prices are listed on the product pages on our website.
I have also attached links to some videos about these products for you.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can Roadmaster Comfort Ride Fit 2018 Primetime Lacrosse 3360
- Article: Trailer Tire Sizing
- Q&A: Why isn't Axle Spacing of Roadmaster Comfort Ride Listed
- Q&A: Will the Roadmaster Comfort Ride Leaf Spring Suspension Kit Work On a Heartland Wilderness
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: What Is Max Width MORryde RV Cargo Sliding Tray For 2021 Gand Design Solitude 378MBS
- Q&A: Inside Dimensions of the MORryde Sliding Tray # MR87FR
- Q&A: Dimensions Of The MORryde Sliding Tray For RV Cargo Compartments # MR87FR
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: How to Raise Your Travel Trailer Height
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Accurately Measure Trailer Leaf Springs