How to Determine Replacement Hub For Fleetwood Pop-Up Camper

Question:

Hi, I have a 2005 Fleetwood Coleman Bayside pop up camper and i am looking to replace the whole hub assemble with new brakes and bearings. Is there an easy way to identify the correct hub assemble?

asked by: Augi

Helpful Expert Reply:

I'll just be honest, there is not a simple way to find the hub assembly for your Fleetwood pop-up camper. It doesn't take someone with an advanced degree or anything it's just a bit of a pain in the behind. But it's also necessary, and what you need to do is take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.

If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the photo I added. You will also need to know your wheel bolt pattern; if you aren't sure what your wheel bolt pattern is I have linked a printable template which will tell you exactly what you have.

So for example, if your bearings are L44649 (1.063" inner diameter) and you have a 5 on 4-1/2" bolt pattern, you would use the Dexter Trailer Hub & Drum Assembly for 2,000 lb Axles - 5 on 4-1/2 # 8-257-5UC3.

I have added a link below to our entire selection of hubs for you once you find this info.

expert reply by: Kyle S