Can Buyers Products 3 Position Pintle Hook Mount be Used in Rise Position

Question

Question:

Can this be safely flipped so that it raises the height instead of dropping it?

asked by: Ben E

0

Expert Reply:

Yep, you can absolutely use the Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver # 337PM25812 in the rise position instead of the drop position.

This is a 20k mount that will go perfectly with a pintle hook like the Curt Pintle Hook # C48210 with Mounting Kit # 3378520.

expert reply by: Kyle S

0

Answer 1

The Buyers Products 2" Pintle Hook Mount part #337PM90 can be inverted to provide a greater rise or installed in the normal position to provide a greater drop. If you don't already have a pintle hook and hardware you can use the…

view full answer...

Answer 2

The Curt Pintle Hook with 2-5/16 Inch Hitch Ball #C48200 features mounting hole dimensions that are 1-3/4 inches apart (on center) vertically, and 3-1/2 inches apart (on center) horizontally. I have attached an image with these dimensions labeled…

view full answer...

Answer 3

Yes the Buyers Products 10 Ton Combination Hitch with Mounting Kit #33710057 does fit the Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver #337PM25812.

view full answer...

Answer 4

Yes, if you wanted to use the Curt Pintle Hook with 2-5/16" Ball #C45908 that you referenced in the rise position you certainly could. You'd flip the hook combo as well as the shank upside down and you'd be set.

view full answer...

Answer 5

Yes, you can definitely use the Curt Pintle Hook Mounting Plate #C48349 in both the drop and rise positions to achieve a level towing setup. If you'd like a new pintle hook then we have the Curt #C48210 which comes with it's own set of…

view full answer...

Answer 6

The mounting holes on the Curt SecureLatch Pintle Hook #CU97FR are spaced 1-3/4" apart vertically and 3-3/8" horizontally on center. I have an alternate solution with the information you requested as when I spoke to Curt they said this…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...