Recommended Hitch for a 2021 Mazda CX-5
Question:
I am looking for a hitch for a 2021 Mazda CX-5. It will be primarily used for a cargo carrier I have from a previous vehicle but I would like the ability to tow a small uhaul trailer too.
asked by: Emily
Helpful Expert Reply:
To add a hitch to your 2021 Mazda CX-5, I recommend the etrailer Hitch item # e98902. This hitch is custom fit and bolts to your Mazda with included hardware. It is a class III hitch with a 2" receiver so it will be great for accessories like your cargo carrier and have plenty of capacity for pulling a uhaul trailer.
I really like this hitch because the crosstube mounts behind the rear bumper cover completely concealing it. This leaves only the 2" receiver visible which not only helps with ground clearance but it looks better. I have attached a couple of pictures below along with an installation video so you can see what it looks like once installed.
To tow a trailer you will also need a wiring harness item # C56377 and a ball mount kit item # C45534.
I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- CURT
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Which Hitches are Made in the USA
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Q&A: Recommended 2-Inch Trailer Hitch For 2024 Mazda CX-5
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Q&A: Mazda CX-5 Signature Hitch Installation and Trim Removal
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 2024 Mazda CX-5 Trailer Hitch and Wiring Recommendations with Mounting Brackets
- Q&A: Is Trimming Required to Install the etrailer Hitch # e98902 on My 2021 Mazda CX-5?
- Article: My Trailer Hitch Doesn't Fit
- Article: Roof Rack Information
- Article: How to Measure for Trailer Hitch Drop