Recommended Hitch for a 2023 Mazda CX-5
Question:
I need a hitch for my 2023 Mazda CX-5. I'll be using it to haul my bike rack and occassionally pull a small trailer without brakes.
asked by: Jake
Expert Reply:
To add a hitch to your 2023 Mazda CX-5, I recommend the etrailer Hitch item # e98902. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Mazda with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper. This leaves only the 2" receiver visible.
The etrailer Hitch item # e98902 has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight. This hitch has plenty of capacity to not only carrier accessories but also pull your trailer.
I have linked a couple of pictures below along with an installation video so you can see what this hitch looks like when installed.
Since you are planning on towing you will also need a wiring harness item # C45FV and a ball mount kit item # C45534. I also recommend using the No-Drill Mount Bracket item # 18136 to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: c45fv
- Search Results: e98902
- Search Results: lug nut
- Search Results: 8~250
- Search Results: sleeve
- Search Results: wear sleeve
- Shop: Roof Rack
- Search Results: 8~247
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 5/8" Studs
- Shop: Curt Extender for 2" Hitch Receivers -18" Long
- Shop: Shackle Strap - 2-1/4" Long
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Dexter BrakeRite Electric Over Hydraulic Actuator for Disc Brakes - Vented - 1,500 psi
- Shop: Floor Mats
- Video: Choosing the Right Trailer Wiring
- Video: Curt Powered Tail Light Converter Installation - 2023 Mazda CX-50
- Video: Review of CURT Custom Fit Vehicle Wiring - Mazda CX-5 or CX-50 Trailer Hitch Wiring - C45FV
- Video: etrailer Trailer Hitch Installation - 2023 Mazda CX-5
- Video: Best 2023 Mazda CX-5 Trailer Hitch Options
- Video: Curt Class III Trailer Hitch Installation - 2023 Mazda CX-50
- Q&A: Does Rear Bumper of 2019 Mazda CX-5 Get Trimmed to Install Trailer Hitch
- Shop: Mud Flaps
- Video: WeatherTech Cargo Liner Review
- Q&A: Tail Light Kit For 24x60 Reese Cargo Carrier 63153
- Q&A: 4-Way and 7-Way Trailer Wiring Harness For a 2023 Mazda CX-50 With Curt Trailer Hitch Receiver
- Q&A: Compatibility of Yakima Y04052 EvenKeel with Crossbars on Malone MAL53FR EcoLight Trailer