Parts Needed to Install Redarc Tow-Pro Liberty in 2010 Toyota Tacoma

Question

Question:

Good evening, I have a 2010 TRD Off Road Tacoma that has a tow package installed from factory. Im interested in the redarc trailer brake controller with part numbers RED24FR and RED49FR. Can you kindly confirm this is the correct product for my vehicle? Also, can you confirm it comes with all of the wiring harnesses required to install? brake controller to remote knob and the harness to connect the controller to the factory harness Id like to purchase as soon as possible. Thanks!

asked by: Daxton

0

Expert Reply:

The Redarc Tow-Pro Liberty Brake Controller # RED24FR and the Plug-and-Play Wiring Harness # RED49FR are everything you need to get this installed. The only other thing you may want to consider is the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-007. This will fit in the blank knockouts in your 2010 Tacoma giving it a very clean look in your truck.

expert reply by: Robin H

0

Answer 1

The best brake controller solution we have for you and your 2020 Toyota Tacoma is the Recarc Tow Pro Elite part #RED44FR with the custom install harness #3031-S. Unlike other brake controllers this one only puts a really small knob on your dash (or…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Parts Needed to Install Redarc Tow-Pro Liberty in 2010 Toyota Tacoma

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching