Recommended 4 on 4 Idler Hub for an Axle w/ L44649 Inner and Outer Bearings
Question:
Need hub and bearing assemlies: 1995 Jayco 1207 tent trailer with a 2210 # Torflex axle, 4 0n4 hub. L44649 bearings, L44610 races, 1.062 spindle dia.1.5 id and 1.980 od seal. prefer to pack bearings. Wheel center hole is 2 3/4 and hub flange at wheel mount is 2,458. Several hubs are listed, what are the differences and which one do you recommend. Reading about a BTR spindle in discription. Dont know what that is. 440-2-G-ez2K, 8-91-05UCI, AKIHUB-440-2-2K, AKIHUB-440-2-G-2K, 8-91-05UC1-EZ.
asked by: Ken W
Expert Reply:
The best option to replace the hubs on your 1995 Jayco 1207 tent trailer are the Dexter Trailer Idler Hub Assembly item # 8-91-05UC1-EZ. This hub has a 4 on 4 bolt pattern and is designed for 2,000 lbs axles with item # L44649 inner and outer bearings. This hub is sold individually and includes all necessary bearings and seals to install on your trailer. Also included are four replacement lug nuts.
A BTR spindle has a grease zerk at the end. This can be easily accessed with the removable rubber plug that comes with the included dust cap.
I recommend using LubriMatic LMX Industrial Strength Grease item # L11390 to repack your bearings.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Search Results: 8~91~05uc1~ez
- Search Results: am3h390
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-EZ-2K Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-91-05UC1-EZ Review
- Q&A: Can I Remove A Weld-On Trailer Coupler and Replace it With A Bolt-On Coupler?
- Shop: A-Frame Coupler with Black Paint Finish - 2" Ball - 5,000 lbs
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Silver - 2" Ball - Bolt On - 10K
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range C
- Q&A: Difference Between 205/65-10 and 20.5 x 8-10 Trailer Tire Sizes
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Video: Demco A-Frame Trailer Coupler - Standard Coupler - DM14793-52 Review
- Search Results: dm14793~52
- Video: Demco eZ-Latch A-Frame Trailer Coupler Review and Installation
- Search Results: btr spindle
- Search Results: 4 on 4 hub
- Search Results: atwood trailer coupler
- Q&A: Maximum Speed Rating of kenda Loadstar # AM1ST92
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Comparing Demco A-Frame Coupler DM37ZR and DM14793-81
- Q&A: Replacement Coupler for Atwood Hydraulic Brake Actuating Coupler for Drum Brakes
- Q&A: What is Angle of Redline A-Frame Coupler, part # CA5400
- Search Results: couplers
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Lippert Solera Slider Slide-Topper Review
on Trailer Hubs and Drums
