Parts Needed to Tow Trailer with 2019 Jeep Cherokee

Question

Question:

Dear madam or sir, Can you give me a basket or collection of products with all the parts to youre a trailer for a 2019 Jeep Cherokee without the tow package please. Could you also clarify towing capacity, trailerbrakes, connecting plugs etc. Maybe you have a video that explains these things. I thought it better to ask someone who knows a lot than try to figure these things out and make a mistake like shorting the electrical system or some other error of inexperience. Thank you.

asked by: Andrew G

1

Helpful Expert Reply:

The first thing you will need to tow a trailer with your 2019 Jeep Cherokee is a trailer hitch like the Curt # C13395. The next thing will be trailer wiring like the Curt # C56406 if the trailer does not have brakes and a 4-way connector. Most of the trailers you'd be towing with your Cherokee would be without brakes so this would cover most applications.

If the trailer does have brakes you would need a brake controller like the Redarc Tow Pro Liberty # RED24FR with the part # RED69FR. Then for the vehicle wiring side you'd need the # ETBC7 to convert it to a 7-way and wire up the brake controller.

For a ball mount kit that would work really the part # 989900 comes with two ball mounts with two ball sizes.

It looks like your vehicle has a 2,000 lb towing capacity which would be the heaviest trailer you could tow.

We don't have a video that covers this specific topic but hopefully I was able to help.

expert reply by: Jameson C

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Parts Needed to Tow Trailer with 2019 Jeep Cherokee

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching