Proper Wiring of a Hitch-Cover Brake Light so it Does Not Blink when Turn Signal is Activated
Question:
Hello, As an additional safety, I want to install an after-market hitch-cover brake light that will automatically illuminate bright red whenever the vehicles brake pedal is depressed. Obviously, no trailer is attached to my vehicle at this point! The wiring instructions that came with the new hitch-cover brake light made by Bully says to simply connect their white wire to chassis ground and to connect their green wire to the existing green wire right turn signal/brake light that comes out of the common flat 4-wire connector used for vehicle/trailer wiring. My vehicle has a standard 3-wire dual-filament bulb that allows the green wire to activate the right turn signal AND the stop light simultaneously. Therefore, when I hook up the new hitch-cover brake light hot wire to the existing green right turn/brake wire, the new hitch-cover brake light will blink whenever the vehicles right turn signal is activated yes... it also does come on steady when the vehicles brake pedal is depressed. How can I isolate this wiring so that my newly installed hitch-cover brake light ONLY comes on when the vehicles brake pedal is depressed and NOT when the right turn signal is activated? Is there any type of after-market wiring converter or blocking diodes that could be installed between the right turn/brake light green wire and the left turn/brake light yellow wire that would allow my newly installed hitch-cover brake light to ONLY come on when the vehicles brake pedal is depressed and NOT when the turn signals are activated? Please HELP me... this wiring quirk is driving me crazy! Thank you very much for your help! Sincerely, Tom J. Hinkley
asked by: Tom J
Expert Reply:
If you want your hitch cover brake light to only work with the brake lights, I would recommend that you use a 2 Wire Loop, item # 9651P, to make a separate connector for your brake light hitch cover. Then run the white wire to ground and splice the red wire to the third brake light circuit which does not blink when the brakes are applied and the turn signals are activated. You will have a separate two wire connector for the hitch cover with this setup.
At this time I do not know of any converter or diodes designed to block the turn signal from the trailer wiring to allow the hitch cover to remain on constant when the turn signal is applied.
We do have hitch covers that do not blink with the turn signals and use the standard 4-Pole trailer connector, (see link).
Products Referenced in This Question
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 2 Pole
- Plug and Lead
- 2 Pole
- Spectro
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Thule License Plate Holder for Bike Racks - Lighted
- Q&A: How to Mount Bike Carrier Without Obstructing Rear License Plate from View
- Shop: Vehicle Tow Bar Wiring
- Q&A: How to Isolate the Brake Light Circuit on a 2013 GMC Terrain with Combined Tail Lights
- Article: Trailer Wiring Diagrams
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C55384
- Shop: Tail Light Isolating Diode System with Wiring Harness
- Video: Yakima PlateMate Bike Rack License Plate Holder Review
- Video: Review of Thule Lighted License Plate Holder for Bike Racks - TH35JV
- Shop: Yakima PlateMate License Plate Holder for Bike Racks
- Q&A: How To Display a License Plate With a Bike Rack Attached
- Q&A: Connecting Thule License Plate Holder # TH35JV To 4-Way Flat Trailer Connector Wiring
- Q&A: Will the License Plate on a 2021 Infiniti QX50 Be Blocked By a Thule Helium or T2 Pro XTR Bike Rack
- Q&A: Light Kit and License Bracket Holder Recommendation for the Hollywood Racks Sport Rider SE
- Video: Optronics Trailer Lights - License Plate Lights - LPL55CB Review
- Q&A: How to Wire Illuminated License Plate Holder to Trailer Connector
- Search Results: 7 pin to 4 pin
- Search Results: lighted hitch covers
- Video: Spectro Wiring - Wiring Adapters - 9653P Review
- Video: Review of Curt Hitch Covers - Hitch Cap Sensor for 2-1/2 Hitches - C36UR
- Search Results: waterproof wire connector
- Article: Rooftop Cargo Carriers
- Shop: Suspension Enhancement
- Video: Timbren Rear Suspension Enhancement System Review TDRTT1500