Correct Replacement 58" Awning Arms for a 2021 Forest River Cherokee Wolf Pack

Question

Question:

We have a 2021 Wolfpack Cherokee 5th wheel and we need to replace an awning arm. When we measure what you say to measure we get 58. What do we need to order?

asked by: Sandra R

0

Expert Reply:

For your 58" long arms, you're going to need the Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs # LC62ED for the Idler arm, and Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED for the drive arm.

expert reply by: Bryce D

0

Answer 1

The Replacement Support Arm Assembly for Lippert Edge 58" Awning LC77VR has been discontinued, however we do have it's replacements the Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs #LC22ED and the Replacement…

view full answer...

Answer 2

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use…

view full answer...

Answer 3

The ladders that are found on the backs of RVs and travel trailers are fairly universal, and not necessarily specific to your coach. These ladders can be trimmed to size but come in 3 basic ladder heights: 84-1/2-, 97- and 99-1/2-inches tall. You…

view full answer...

Answer 4

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…

view full answer...

Answer 10

Surge brakes use a hydraulic actuator to push fluid to the cylinder piston to activate the brake shoes on drum brakes or brake pads on disc brakes. This pressure should only be applied when weight is pushing against the hitch ball, so no pressure…

view full answer...

Answer 11

The Blue Ox systems cannot be moved back that far but we do have the perfect system for you. Take a look at the Reese SC weight distribution systems linked to the right (minus the ones that say Light Duty). These systems have narrow brackets that can…

view full answer...

Answer 12

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Correct Replacement 58" Awning Arms for a 2021 Forest River Cherokee Wolf Pack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching