Is 48 Inch Width The Inside Dimension of Malone Axis Truck Bed Extender

Question

Question:

I see where you can adjust the width of the extender MPG907 up to 48. Is that the inside dimensions, I will be using it to haul 4 wide sheets of plywood and if they adjust just to 48 it will be a tight fit.

asked by: Kevin M

0

Expert Reply:

Correct, the 48 inches is indeed the inside width of the crossbars on the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches # MPG907.

expert reply by: Kyle S

0

Answer 1

The Erickson Big Bed Junior Load Extender, Item #EM07605, extends 4 feet from hitch when used as bed extender and 11 inches when used as high mount load bar. It has five height adjustments that are in 1-3/4 inch increments and can be extended from…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 4

There is no reason why you couldn't install a front mount hitch and and add a front load bar to help support your Kayak and create more clearance between it and your travel trailer. The front mount hitch I recommend for your 2007 Toyota Sequoia…

view full answer...

Answer 5

In regards to the Malone Axis Truck Bed and Roof Load Extender part #MPG907, the distance from the center of the hitch pin hole to the top of the crossbar can be adjusted from 55-1/2" to 62-1/2". I spoke with Malone about the load stops but…

view full answer...

Answer 6

The Erickson Big Bed Load Extender, #EM07600, measures 49-1/2 inches from the hitch pin hole to the outer edge of the upright. I have included a picture to illustrate this measurement. To determine exactly how far the extender, #EM07600, will extend…

view full answer...

Answer 7

The Malone Axis Load Roller for Malone Truck Bed and Roof Load Extender - 42" Long, part #MAL52VR, that comes with the Malone Axis Truck Bed and Roof Load Extender with Load Roller, part #MAL32VR, is fixed in length. It does not extend in and…

view full answer...

Answer 8

I do have an option for you but the angle piece from the Swagman Traveler XCS S64664 would not allow you to carry a bike rack and cargo rack at the same time. If you were able to make it work it would be very unsafe. I recommend to use the Malone…

view full answer...

Answer 9

Yes, the Malone 2-Inch Dual Purpose Hitch Receiver Adapter #MPG544 can be used to tow a vehicle using a tow bar in the lower receiver while at the same time using a hitch-mount type bike rack in the upper receiver. You do want to keep in mind that…

view full answer...

Answer 10

The dual hitch receiver with the highest tongue weight capacity is the Malone 2" Dual Purpose Hitch Receiver #MPG544, which has a 400 lb tongue weight capacity. I have added a link to a video review for you to check out. However, it is important…

view full answer...

Is 48 Inch Width The Inside Dimension of Malone Axis Truck Bed Extender

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching