Replacement Bearings, Races, Grease Seals & Bearing Buddy Protectors 2012 Aliner Expedition Camper
Question:
Hello, I have a 2012 Aliner Expedition that I am looking to update with all new bearings, racers, seals, etc and also a set of bearings buddy. Can you send me a list of products for this project please? Thanks for the help
asked by: Anthony S
Helpful Expert Reply:
As your 2012 Aliner Expedition has a GVWR of 3,500lbs you most likely have the standard #84 spindle which will use the Bearing Kit # BK2-100. If you can find the axle tag or serial number stamped on your axle I can confirm this is what you have with the axle manufacturer. Otherwise you might pull one of your hubs apart to verify you have the following bearings and grease seals.
Inner Bearing # L68149(Inner Diameter 1.378")
Outer Bearing # L44649(Inner Diameter 1.063")
Grease Seal # 58846(Inner Diameter 1.719", Outer Diameter 2.565")
If you find you have anything different please let me know and I can help you find the correct parts.
The Bearing Buddy Bearing Protectors # BB1980A-SS are the correct size to fit a hub using this bearing kit.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer
- Q&A: Does Bearing Buddy Seal Kit # BB60002 Fit 3,500 lb Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires