Coupler Lock for Underslung Trailer Coupler I am looking for a highly secure hitch c

Question

Question:

Hello, I am looking for a highly secure hitch coupler lock. The AMP56FR looks like a good candidate. 1 Will the AMP56FR work on my RV? SEE PHOTOS OF MY HITCH COUPLER 2 Do you recommend any other make/model coupler lock? Which is best in your opinion for my RV? COMMENT: I am pretty sure that the Proven Industries 2516-J will work too, but it is really pricey. I like the lower cost of the AMP56FR. 3 How hard is it to defeat the AMP56FR? I know this is somewhat subjective. My RV: 2022 Jayco Feather 24BH see photos. Width of MY flange is a little less than 4-3/4 inches. Height of coupler looks like my tape-measure it fits in the 2-7/16 inch width window.

asked by: John W

1

Helpful Expert Reply:

Thanks for the picture of your trailer's coupler, from that I can tell you have an underslung coupler which his what the AMP Lock Coupler lock part # AMP56FR is designed to fit. It also works with the flange width you mentioned as well.

This is a harder to defeat coupler lock that would work well for you. I would recommend it highly because of that.

expert reply by: Jameson C

1

Underslung Coupler
(click to enlarge)

Answer 1

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 2

Since the Demco Trailer Coupler #DM6125-81 that you have does not have a lip around the edge of the coupler you'd need to go with a different coupler lock instead of the part #AMP56FR that you referenced. Instead you'd want a coupler lock…

view full answer...

Answer 3

Depedning on what your trailer has we may have what you need. If your trailer has an underslung 2-5/16" ball coupler #AMP56FR is a great option. -If you have a flat lip 2" ball coupler, then the AMPLock Coupler Lock for Flat Lip 2"…

view full answer...

Answer 4

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 5

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 6

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 7

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Coupler Lock for Underslung Trailer Coupler I am looking for a highly secure hitch c

Product Page this Question was Asked From

Continue Researching