Comparing Tekonsha Universal 7-Way Versus ETBC7L Install on a 2023 Kia Telluride

Question

Question:

For a 2023 Kia Telluride, please compare the benefits/disadvantages of using 7-way part #22551 with using a combination of the 4-way C59236 harness and the 7-way ETBC7L upgrade. I have no need for a 4-way. Ive seen both options recommended on etrailer. Thanks.

asked by: John T

0

Expert Reply:

Using the Universal Wiring Harness w/ ModuLite and Brake Controller Harness # 22551 on your 2023 Kia Telluride will allow you to use a dash mounted brake controller like the Tekonsha Prodigy P3 # 90195. It also only has a 7-way connection which would require you to use an Adapter # 78118 for a smaller trailer with only a 4-way connectorl

The combination of the Curt Powered Tail Light Converter # C59236 and 7-Way RV Upgrade Kit # ETBC7L would require you to use a wireless/Bluetooth brake controller like the Curt Echo # C51180. This kit also gives you a 7-way blade and 4-flat connector which are the most common connectors used on trailers.

expert reply by: Bud M

0

Answer 1

As of 3/11/23 the only wiring harness available for the 2023 Kia Telluride are universal options that have to be spliced. We do not have an ETA on when to expect a custom harness. So if you need a wiring harness now a universal fit is your only…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

The correct wiring harness for your 2024 Kia Telluride SX Prestige X-Line is the Curt #C29ZV. This plugs into the connection points in your rear cargo area and is compatible with your LED lights. The #TK74CR is only designed to work with the LX and S…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 9

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Comparing Tekonsha Universal 7-Way Versus ETBC7L Install on a 2023 Kia Telluride

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching