Reverse Lockout Solenoid Kit For Demco Hydraulic Brake Actuator DM72VR

Question

Question:

Reverse Lockout Solenoid Kit would i need to purchase for the Demco 2 Hydraulic Drum Brake Actuator Zinc Plated EZ Latch, 7,000lb Capacity DA70 8705001? and do you offer a manual lock out instead of the electric? thank you i appreciate your help.

asked by: Levi

0

Expert Reply:

Yep, we do have a reverse lockout solenoid for the Demco Hydraulic Brake Actuator # DM72VR. There isn't a manual lockout option, so if you're okay with that, what you need is the following:

- Reverse Lockout Solenoid Kit # DM5836

expert reply by: Kyle S

0

Answer 1

view full answer...

Answer 2

The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…

view full answer...

Answer 3

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

view full answer...

Answer 4

Atwood is no longer in business, which means replacement parts are unfortunately no longer available for your Atwood 61101 surge brake actuator. The best option available if yours is no longer working is to replace the actuator, which you can do with…

view full answer...

Answer 5

I have attached a video for you to help you bleed the surge brakes and also given an explanation below. You want to top off the master cylinder and pump the fluid from the master cylinder. You can do this by unbolting the plate that holds the lever…

view full answer...

Answer 6

I have attached an image from the operation manual for the Demco Hydraulic Brake Actuator #DM8669112 that details how to bleed the brakes. The process consists of first elevating the trailer tongue about 4 to 6 inches and then loosening or removing…

view full answer...

Answer 7

The replacement I recommend for an Atwood Surge Brake Actuator 85778 is the Demco Hydraulic Brake Actuator part #DM62VR. It has the same ball size, offers a bolt-on install, and has a greater capacity. The only difference is it has an electric…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Reverse Lockout Solenoid Kit For Demco Hydraulic Brake Actuator DM72VR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching