Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2023 Honda CR-V Hybrid

Question

Question:

Looking to see if Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # C13397 fit the 2023 Honda CR-V Hybrid?

asked by: Robert F

1

Helpful Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C13397 will fit your 2023 Honda CR-V Hybrid. I recommend installing a 4-way flat connector when you install the receiver. You will need either the Curt # C59236 if your CR-V is front wheel drive or the Curt # C56370 if you have all wheel drive. The 4-way is the common connector used on most small trailers you may tow and it will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessories that impair the view of your tail lights.

expert reply by: Bud M

1

Answer 1

In regards to using the Curt Trailer Hitch Receiver part #C13397 on a 2023 Honda CR-V, you may still be able to use the hands free life gate feature but you would be limited to areas away from the receiver. That said, if you are unhappy with the…

view full answer...

Answer 2

I checked with the manufacturer, Curt, and can confirm the Curt Trailer Hitch Receiver part #C13397 is a fit for a 2023 Honda CR-V EX-L. This trailer hitch features a direct bolt-on fit without any drilling required. It has a large receiver tube…

view full answer...

Answer 3

As of April 2023 we have not yet had a chance to install the #C13397 on a 2023 Honda CR-V. However, we have installed this on a 2022 which will be the same process. I have attached the installation video below, along with the written instructions…

view full answer...

Answer 4

The trailer hitch that I recommend for a 2022 Honda CR-V Hybrid is the Curt Trailer Hitch Receiver part #C13397. This hitch offers a bolt-on fit with no drilling required. It has a hidden design so only the receiver tube will be shown under the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2023 Honda CR-V Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching