Options if You Need Replacement Keys for the ToyLok Retractable Cable Lock with Padlock

Question

Question:

How can I get additional keys for my ToyLok. I have a ToyLok with one key. The device has a padlock encased in yellow and black plastic. The key I have does not have a number stamped on it.

asked by: Donald A

1

Helpful Expert Reply:

It sounds like you have the ToyLok Retractable Cable Lock with Padlock # LC337120. We do not have replacement keys and if there are no numbers stamped on the key or lock, there is not really a way to know what the correct key option could be.

But there are a couple potential options for getting more keys. You can take your current key to a home improvement store and have duplicates cut or you can get a different padlock that has more keys with it. As long as the padlock fits through the locking holes it will work, you do not have to use the exact padlock that came with the ToyLok.

expert reply by: Scott S

1

Answer 1

Since all ladder model brackets are different, it truly depends on what model ladder you wish to install. They are all individualized. If you have photos of the exact brackets or model number of the brackets, I would be happy to take that…

view full answer...

Answer 2

Since you have leaf springs that are most likely the 25-1/4 inch length unworn out the best leaf spring replacement would be the part #e34SR which is for 6k trailer axles. Since you wanted a slightly over rated spring this would work great.

view full answer...

Answer 3

The centerline on the #BR27FR is going to be from the center of the hitch pin hole. If you draw a line straight out and measure the distance to the bottom of the hook that is 1". I have attached a diagram below for your reference.

view full answer...

Answer 4

I looked up a copy of the owner's manual for your 2017 Fiat 500 online and it looks like you can flat tow your Fiat as long as it has a manual transmission otherwise a tow dolly must be used. Let me know if this is the case and I can make a…

view full answer...

Answer 5

The Curt T-Connector Vehicle Wiring Harness #C56403 will work with your 2023 Volkswagen Tiguan, yes. We try to get our fits up and online as soon as we can but sometimes the manufacturers get their fits up first. I've send in an update to have…

view full answer...

Answer 6

If your 2021 Rockwood Freedom has a GoPower plug already installed, then all you'll need is the Go Power Portable Solar System with Digital Solar Controller - 90 Watt Solar Panel #34282729 you were looking at. There won't be any additional…

view full answer...

Answer 7

There likely is some corrosion inside that is causing the ToyLok such as #LC337120 to not retract the cable back inside the case. The great thing about ToyLoks is that they are very secure. So secure that it is difficult to get into them without…

view full answer...

Answer 8

Most likely it is the switch of your Fan-Tastic roof vent like what the part #FVK1031-05 is designed to replace but you can try removing the two wires from your old switch and touching them together to test to see if it is the switch. If the fan…

view full answer...

Answer 9

Yes, the Draw Tite hitch part #DT73RR does fit your 2024 Subaru Outback Wagon.

view full answer...

Answer 10

It sounds like you might be trying to pick out a set of stabilizer jacks for your trailer. If that is the case then what you will want to do is park your trailer on flat-level ground and then level it. Once this is done you can then measure from the…

view full answer...

Answer 11

It does look like the D-ring/Tow Recovery hooks on the Rugged Ridge Arcus Front Bumper connect directly to the frame of your 2020 Jeep Gladiator, which is required in order to be able to flat tow with the D-rings, so you're well equipped with…

view full answer...

Options if You Need Replacement Keys for the ToyLok Retractable Cable Lock with Padlock

Product Page this Question was Asked From

Continue Researching