Replacement Hub/Drums/Brake Assemblies for 2004 X-Treme Trailer
Question:
I have 2004 X-treme trailer dbl axle with I believe dexter torsion suspension that has Axletek 07-GG B07E-02 on all 4. The brake 4 bolt pattern is 2 13/16 on center. GVWR for EACH axle is 2400lb. What would I need if I replaced both the drum and brakes? I want complete bearing sets and I have 5 spoke aluminum rim’s that a 5-4 1/2 rim’s so they would have to be the taller lug nuts 2” end to end I only need two complete brake assemblies and then two no brake assemblies for rear Thanks
asked by: Brett B
Expert Reply:
For an exact replacement of what you have you'd want the etrailer brake assembly set part # AKEBRK-2 which is for a 2,000 lb axle like you have. So you'd want just this part number for new assemblies without drums. If you wanted hub/drums as well you'd also need the part # AKHD-545-2-EZ-2K and you'd be set.
Then for a matching idler hub you'd want the part # AKIHUB-545-2-LF-2K for the axle without breaks.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Q&A: How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Article: Trailer Wiring Diagrams
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: Brake Controller Installation: Starting from Scratch