Parts Needed To Install a 7-Way and Trailer Brake Controller On a 2023 Kia Telluride

Question

Question:

Good afternoon - I am looking for a 7-pin trailer harness for a 2023 Kia Telluride. Those offered on the website are for model years 2020-2022. Do you know if this will fit the 2023 model, and if not, do you sell a harness that will? The Telluride is shipped with the electrics pre-run, so on earlier models it was plug-and-play. Im hoping is the same with 2023. Thanks!

asked by: Jim L

0

Expert Reply:

I recommend the Tekonsha Universal 7-Way # 22551 as the Curt # C68JR will not fit on your 2023 Kia Telluride. The factory connector the Curt harness plugged into was removed on the 2023 model year as there were issues with fires starting on the previous model years. This Tekonsha will allow you to splice in a 7-way and includes all the wiring needed to install a Tekonsha brake controller like the Prodigy P3 # 90195. You can also use the Redarc Tow-Pro Liberty # RED24FR along with the Tekonsha to Redarc Adapter # 331-TPH-017. The Redarc hides the main control unit behind the dash and is controlled by a small control knob giving you a much cleaner appearance inside.

You will need a Mounting Bracket # 18138 to attach the 7-way on your Telluride.

expert reply by: Bud M

0

Answer 1

Because it is only for a 2022 Hyundai Palisade that has the factory tow package, you do not need to route any wires whatsoever to add the Curt 7-way that fits, which is the following part number: - Curt T-Connector Vehicle Wiring Harness for Factory…

view full answer...

Answer 2

Yes, we do offer a plug-in 7-way for a 2022 Hyundai Palisade, the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part #C68JR which is a plug-in fit.

view full answer...

Answer 3

The best trailer wiring harness option we offer for a 2023 Hyundai Palisade is theCurt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C43FV. This offers a completely plug and play installation with no splicing into the vehicle…

view full answer...

Answer 4

Yes it will; I did verify for you the Curt 7-way will indeed fit your 2022 Hyundai Palisade, with the correct part number being the following: - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C68JR This…

view full answer...

Answer 5

That is correct. A 7-way adapter like the Curt Trailer Connector Adapter #C57672 has a blue wire which connects to a typical brake controller in your vehicle. The brakes on your trailer cannot be used without a brake controller. You need the brake…

view full answer...

Answer 6

Along with the Curt T-Connector Wiring Harness for Factory Tow Package #C68JR, you'll need a brake controller. The Curt Echo Wireless Trailer Brake Controller #C51180 will work great, and will simply plug into your 7-way connector at the rear of…

view full answer...

Answer 7

Let me help you out with that question. **Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen #FOS05TASF. *Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7"…

view full answer...

Answer 8

It is very, very likely that the issue with no power to the 12 volt pin of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C68JR is due to a fuse either having been blown or not inserted, so definitely…

view full answer...

Answer 9

What you can do to have a 7-way/4-way combo at the rear of your 2022 Hyundai Palisade is to start with the 7-way kit part #C68JR that you referenced and then instead use the 7-way/4-way socket part #30955 in place of the included 7-way and you'd…

view full answer...

Answer 10

Your 2021 Hyundai Palisade has brake controller wiring that runs from the port under the dash back to the plug that the Curt 7-way kit part #C68JR plugs into. That is why this kit that fits your vehicle does not have any wiring that runs from the…

view full answer...

Answer 11

The best option for a trailer wiring harness for your 2022 Kia Telluride is from Curt, as we have found over time that these are by far the most reliable wiring harnesses in the industry. The correct fit for your '22 Telluride is the following: -…

view full answer...

Answer 12

Let's start with the hitch for your 2023 Kia Telluride, and the correct fit is the etrailer Trailer Hitch Receiver #e45ZR. As for the wiring harness, there is not a plug-and-play option so you'll have to hardwire a 4-way in, the Curt Powered…

view full answer...

Parts Needed To Install a 7-Way and Trailer Brake Controller On a 2023 Kia Telluride

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching