Can You Remove the Case on the Dutton-Lainson StrongArm Electric Winch for Install

Question

Question:

I have tapped mounting holes for mounting a winch. Currently have Dutton hand crank winch. Is the cover removable and have clearance to tighten the mounting bolts?

asked by: Craig S

0

Expert Reply:

The Dutton-Lainson TW4000 StrongArm Electric Winch part # DL25200 has an access hole in the rear of the unit you can use for tightening the mounting hardware, I have attached a photo of this below. We also offer the Dutton-Lainson Quick Mount Kit for StrongArm Electric Winches part # DL70309 which makes installation easier since you don't have to secure the bolt head with a tool.

The case on the Dutton-Lainson TW4000 StrongArm Electric Winch is removeable but it's not designed to be removed for installation so I don't recommend this.

expert reply by: Conner L

0

Can You Remove the Case on the Dutton-Lainson StrongArm Electric Winch for Install
(click to enlarge)

Answer 1

I am not familiar with the Trax Electric Winches so I am not sure what their mounting plates look like. However, the Dutton-Lainson winch mounting plate #DL24059 has the top 2 holes spaced 2-1/2" apart. Then the third hole in the middle is…

view full answer...

Answer 2

The Dutton-Lainson StrongArm Electric Winch w/ Remote #DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that…

view full answer...

Answer 3

The Dutton-Lainson StrongArm Electric Winch, #DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the…

view full answer...

Answer 4

I spoke with my contact at Dutton Lainson and he thought the most likely problem you are experiencing is that the clutch gear and 120 tooth gear are stuck together. He said that in high humidity situations where the winch hasn't been used in a…

view full answer...

Answer 5

I contacted Dutton-Lanison, and they mentioned that the Replacement Side Knob for Dutton-Lainson StrongArm Electric Winch #DL94FR for the Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200, and the Dutton-Lainson StrongArm Electric Trailer Winch…

view full answer...

Answer 6

Yes the Dutton-Lainson TW4000 StrongArm Electric Winch - Marine - 1,500 lbs #DL25200 you were looking at can be connected to a marine battery as long as it is a 12v battery that is rated for more than 40 amps. Keep in mind that the battery will not…

view full answer...

Answer 7

The Dutton-Lainson TW400 StrongArm Electric Winch #DL25200 is rated for use with boats up to 4000-lbs total weight. Having roller bunks provides a definite advantage over standard carpeted bunks since this trailer feature reduces friction. However,…

view full answer...

Answer 8

I spoke with my contact at Dutton-Lainson regarding the TW4000 StrongArm Electric Winch #DL25200 referenced in your question. She stated that the winch is not designed to serve as a boat strap when traveling so this is not recommended. Once pulled in…

view full answer...

Answer 9

I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part #DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.

view full answer...

Answer 10

The Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 is the one I recommend for your application. It has a strong, high-impact and weather-resistant case to protect it from the elements. It also includes a brushed stainless steel front plate…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Can You Remove the Case on the Dutton-Lainson StrongArm Electric Winch for Install

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching