Recommended Replacement Latch And Holder For A 2016 Fleetwood Bounder

Question

Question:

Looking for these parts on a 2016 Fleetwood Bounder - Lat h and holder for the screen door - cannot find these anywhere

asked by: Mark

0

Expert Reply:

I took a look at those latches on your 2016 Fleetwood Bounder and was not able to find anything, unfortunately.

With that being said, the best we can offer is for a completely different replacement. I know this probably is not ideal, however if you're interested the closest I was able to find is the:

-T-Style Hook and Keeper Door Holder for Trailer Rear or Side Door # PLR9-A.

This door holder uses a low-profile hook and keeper to keep your door open while loading and unloading. The hook on this door holder measures 4", has a hook mounting bracket dimension of 3" tall x 1-3/4" wide x 3/8" thick, and measures 2-5/16" horizontally; 1" vertically from center on center between the mounting holes.

I have attached an installation video of this being installed on an enclosed trailer for you to check out.

expert reply by: Bryce D

0

Replacement Latch for a 2016 Fleetwood Bounder
(click to enlarge)

Answer 1

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

view full answer...

Answer 2

Yes, the Kenda Karrier ST175/80R13 Radial Trailer Tire #AM31990 will indeed fit on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. The spare tire carrier will work with virtually any 4 lug, 5 lug or 6 lug wheel. The #AM31990 wheel uses the…

view full answer...

Answer 3

When installing marker lights we recommend using 18 gauge wire like #SWC97FR. This is stranded wire and is what we typically use when wiring marker lights like the #MCL32ABB for example. LED marker lights pull very low amperage so 18 gauge is likely…

view full answer...

Answer 4

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 5

The UWS tool box part #UWS01039 that you referenced is made from 13 gauge aluminum which is .090 of an inch thick.

view full answer...

Answer 6

The UWS A-Frame Trailer Toolbox #UWS01039 measures 18" wide on the outside so if you use the larger Ego batteries that give you the 18" this won't be wide enough and you'll need to use a different box like the DeeZee Specialty…

view full answer...

Answer 7

I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer. To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your…

view full answer...

Answer 8

I have exactly what you will need for your 2015 Jeep Wrangler Unlimited to tow your Vintage Airstream with brakes. The first thing you will want is a 7-way trailer connector at the rear of the vehicle and for this I recommend the Hopkins Endurance…

view full answer...

Recommended Replacement Latch And Holder For A 2016 Fleetwood Bounder

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching