Correct Cushioned Ball Mount For 4-1/2" to 5-1/2" Drop For 2" Hitch
Question:
I have a GMC Yukon 2021 with air suspension. I notice the height goes up and down as it auto-levels. Ive taken multiple measurements and because of the auto-leveling, Ive gotten a range of hitch drop calculations between 4.5 inch drop and 5.5 inch drop. Do you have a suggestion on if I should get Convert-a-ball 4 inch or 6 inch drop for this application? Ill be towing a 1,000 lbs snowmobile trailer with cargo up to 1,200 total 2,200 lbs. Thanks.
asked by: Kevin
Expert Reply:
For a drop between 4-1/2" and 5-1/2" use the Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop # AMSC6.
This will fit your 2" hitch and the only other things you will need are the 1-7/8" Hitch Ball # 19260 OR 2" Hitch Ball # 63845 with Hitch Lock # e98880 OR Hitch Pin and Clip # 37201074.
Products Referenced in This Question
Hitch Pin and Clip for 2" Hitches - 5/8" Diameter x 2-7/8" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-7/8 Inch Long
- Fits 2 Inch Hitch
- 5/8 Inch Diameter
- 2-7/8 Inch Span
- JR Products
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Continue Researching
- Q&A: Recommended Offset Gooseneck Hitch Ball for the 2020 and Newer GM Factory Puck System
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Troubleshooting No Power to Tow-Pro Liberty Brake Controller On a 2023 Toyota Tacoma
- Q&A: Recommended Trailer Hitch for Towing Small Kayak Trailer With 2012 Chevy Volt
- Q&A: Best Trailer Hitch for 2012 Chevy Volt
- Q&A: Does Redarc Tow-Pro Liberty LED Only Flash When Trailer is Connected
- Q&A: Does Knob of Redarc Tow Pro Liberty part # RED24FR Light Up with Headlights
- Q&A: Redarc Brake Controller Testing on a 2017 Subaru Outback
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Bike Racks for Electric Bikes
- Article: My Trailer Hitch Doesn't Fit
- Article: Nissan Tow Package Wiring Harness 118266/118267 - 7 Way Harness Installed and Electric Brakes Locked
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers