Ground Clearance For a Curt Trailer Hitch Receiver # C94WR On a 2023 Hyundai Tucson

Question

Question:

what is the ground clearance on 2023 Hyundai Tucson class 3, 2inch trailer hitch?

asked by: Mike

0

Expert Reply:

When we installed the Curt Trailer Hitch Receiver # C94WR on a 2022 Hyundai Tucson we found it to have a hitch height of 17" to the inside top of the receiver. This will put you at 14-1/2" of ground clearance to the bottom of the receiver. Your 2023 should be identical to these heights as the vehicle is unchanged. Do note that depending on cargo and passengers the height could be slightly lower or higher.

expert reply by: Bud M

0

Answer 1

The Kuat NV 2.0 Base 2-Bike Platform Rack for 1-1/4 Inch Hitches #BA12B that you referenced is indeed capable of securing 2 bikes of up to 60 pounds each. As far as your 55 pound e-bikes, the rack itself is more than up to the task. The only thing…

view full answer...

Answer 2

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 3

The Tucson went through a redesign for the 2023 model year so a hitch for a 2017 will not fit the 2023 Hyundai Tucson. To add a hitch to a 2023 Hyundai Tucson, I recommend the Curt Trailer Hitch item #C94WR. This hitch is custom fit and bolts to your…

view full answer...

Answer 4

According to Curt, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2, part #C94WR, is compatible with all versions of the 2022 Hyundai Tuscon, including your Hyundai Tuscon Hybrid Limited.

view full answer...

Answer 5

I checked with Curt and the etrailer Trailer Hitch Receiver part #e38KR is a fit for a 2023 Kia Sportage AWD Hybrid. There are no further modifications needed for this sub-model, it features a bolt-on no drill or cutting installation. Please note, if…

view full answer...

Answer 6

The trailer hitch I recommend for your 2019 Jeep Wrangler is the etrailer.com hitch part #E98856 because it's made in the USA, has great weight capacities, and has an extended hitch tube to make fitting hitch bike racks easier to fit around the…

view full answer...

Answer 7

If you are worried about the possibility of a bike rack hitting your flat towed 2013 Toyota Tacoma, then a few quick measurements might help. Hollywood Racks RV Rider Bike Rack #HLY64FR, measures 32 inches from the center hitch pin hole to the…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR and…

view full answer...

Answer 11

Yes, the etrailer hitch part #e38KR does fit your 2024 Hyundai Tucson Hybrid.

view full answer...

Answer 12

Yes, this Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C94WR is a compatible hitch receiver and confirmed to fit your 2022 Hyundai Tucson Hybrid Limited.

view full answer...

Ground Clearance For a Curt Trailer Hitch Receiver # C94WR On a 2023 Hyundai Tucson

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching