Hook Diameter of CargoBuckle G3 Retractable Ratchet Tie-Down Straps # IMF18800

Question

Question:

What diameter are the tie down hooks? Than you

asked by: Dr M

0

Expert Reply:

The diameter of the hooks of the CargoBuckle G3 Retractable Ratchet Tie-Down Straps # IMF18800 that you referenced are 1/4 inch.

expert reply by: Jameson C

0

Answer 1

When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…

view full answer...

Answer 2

The purpose of most boat tie-downs is to strap the lightest object to the heaviest object, meaning you will want to choose a tie-down with a break strength that exceeds the weight of the lightest object. Your transom straps are used in conjunction…

view full answer...

Answer 3

No customers have said specifically they were using CE Smith guide-ons #CE27620 for a Whaler Classic Montauk. The overall height from the top of the pipes all the way down to where the metal support arm starts to turn towards the trailer is 46-1/2…

view full answer...

Answer 4

We do have a spare tire cover for a 4.80-12 trailer tire. These tires measure about 20-1/2 inches in diameter, so you'll need a spare tire cover that can cover that dimension. For that I recommend the CE Smith Spare Tire Cover #CE27410. This is a…

view full answer...

Answer 5

The wheels are hub-centric. The wheel bolts instead of lug nuts is the only clue needed. A hub-centric wheel centers on the hub using the pilot hole and hub so it would be a snug fit. You could still use a lug-centric wheel as long as the pilot hole…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 10

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Hook Diameter of CargoBuckle G3 Retractable Ratchet Tie-Down Straps # IMF18800

Product Page this Question was Asked From

Continue Researching