Parts Needed to Add 10 Electric Brakes on a Trailer

Question

Question:

hi there i got some question about the product. i m looking the Dexter Electric Trailer Brake Assembly - 10 to put on my trailer but my trailer dont have the break so i want know do i need wire to plug to my f150 2022 if does which wire i need to buy thank you

asked by: Peter W

0

Expert Reply:

It sounds like you're looking to add electric brakes to your trailer and if that's the case we have everything you need for this. It's going to require hubs/drums, braking assemblies, and some wiring on the trailer. That said, in order to confirm these parts for you we first need to start with your axle capacity. The axle capacity can be found on the axle tag in the center of the beam. The Electric Trailer Brake Kit part # AKEBRK-35-SA for example is designed for 3,500 lb axles and would then pair with the Easy Grease Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K. In order to complete your setup I do recommend using a Junction Box # 3375601101 and a 7-Way Connector # H20046.

If you have a different axle capacity please let me know what that is and I will see if we have other options for you or you can just select these yourself for the list below.

expert reply by: Conner L

0

Answer 1

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 2

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 3

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 4

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 5

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 6

The best trailer we offer for your two Titan Propel 12 Kayaks is the Yakima Rack and Roll Trailer part #Y08107 paired with the Heavy Duty Shocks for Yakima Rack and Roll Trailer part #Y08110. The reason that I recommend the Rack and Roll is because…

view full answer...

Answer 7

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Parts Needed to Add 10 Electric Brakes on a Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching